Update: This howto is outdated. GitLab has changed a lot since it was written and a lot of it is not applicable anymore (e.g. since GitLab 5.0 it doesn’t depend on Gitolite any more and only needs one system user to be setup). So you are probably better off using the official installation guide. 🙂

If you want to install Gitlab on Debian you can easily follow their installation steps for Ubuntu. But be careful there are a few gotchas nobody is talking about.

The following steps will assume you are root.

Preparations

First make sure you have all the latest updates installed.

aptitude update
aptitude full-upgrade

Then we have to install a few packages.

aptitude install git-core wget curl gcc checkinstall libxml2-dev libxslt-dev sqlite3 libsqlite3-dev libcurl4-openssl-dev libc6-dev libssl-dev libmysql++-dev make build-essential zlib1g-dev libicu-dev redis-server sudo

Install Ruby

If you have not installed ruby you might want to consider using RVM.

Install it with

bash -s stable < <(curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer)

It will be installed into /usr/local/rvm.

Ask it for the requirements for installing MRI and install them.

rvm requirements

aptitude install build-essentials ...

Install ruby and make it the default.

rvm install 1.9.3
rvm --default use 1.9.3

You should install a minimum set of gems. Add “passenger” if you are running Apache as your web server or “thin” if you are using Nginx.

gem install bundler

Install Gitolite

First of all we want to create a dedicated user for Gitolite and Gitlab. This will also be the user the Rails processes will be running in (this is important later).

adduser \
  --system \
 --shell /bin/sh \
 --gecos 'Git Version Control' \
 --group \
 --disabled-password \
 --home /home/git \
 git

Configure git for the new user.

sudo -u git -H git config --global user.email "git@your-server.tld"
sudo -u git -H git config --global user.name "Gitlab Admin"

Generate the ssh key for the git user. It will be saved in /home/git/.ssh/id_rsa. We will run Gitlab as the git user so it will use this key to authenticate against Gitolite.

sudo -u git -H ssh-keygen -t rsa -b 2048

Copy the public part of the key for later use when we setup Gitolite.

sudo -u git -H cp /home/git/.ssh/id_rsa.pub /home/git/rails.pub

After that we install Gitolite. In contrast to the Gitlab documentation I installed it from the Debian repositories.

aptitude install gitolite

It will not be fully installed as it will tell you something like:

No adminkey given – not initializing gitolite in /var/lib/gitolite.

So we do this by using dpkg-reconfigure and using our previously prepared account.
When prompted, answer as follows:

Gitolite user: git
repositories directory: /home/git
admin key: /home/git/rails.pub

dpkg-reconfigure gitolite

Now you should have Gitolite set up in the /home/git directory. But we will still have to tweak it a little.

Edit /home/git/.gitolite.rc and find the line that reads “REPO_UMASK = 0077;” and change it to “REPO_UMASK = 0007;” (i.e. three zeros).

You now need to change the directory privileges on the /repositories directory so Gitlab can use them

sudo chmod -R g+rwX /home/git/repositories/
sudo chown -R git:git /home/git/repositories/

Gitolite should be ready now.

You can test it by cloning the admin repository:

sudo -u git -H git clone git@localhost:gitolite-admin /tmp/gitolite-admin
rm -rf /tmp/gitolite-admin

Install Gitlab

Install a few prerequisites.

aptitude install python-dev python-pip redis-server libicu-dev
sudo pip install pygments

Clone Gitlab

git clone git://github.com/gitlabhq/gitlabhq.git gitlab
cd gitlab

We create a gemset for Gitlab to not pollute the global gemset. To automate this we will use a .rmvrc inside the Gitlab directory. RVM will make sure it will be loaded automatically whenever you enter the directory.

echo "rvm use 1.9.3@gitlab --create" > .rvmrc

cd into directory to make rvm use the .rvmrc and accept with “y”.

cd .. && cd gitlab

Check your current gemset with

rvm current

It should show something like “ruby-1.9.3-p0@gitlab”.

Now you might need to update Gitlab’s Gemfile (e.g. add the mysql2 gem for MySQL databases).

Now install the gems necessary for running Gitlab.

bundle install --deployment

You may need to run “bundle install –no-deployment” to pick up changes to the Gemfile and rerun the previous command.

Edit config/gitlab.yml to configure Gitlab. If you have followed this howto you should only need to update the “email” section and the “host” option in the “git_host” section.

You might want to edit config/application.rb and update the time zone and locale configurations.

Edit config/database.yml and set up your database configuration.

Now set up and initialize your database.

bundle exec rake db:setup RAILS_ENV=production
bundle exec rake db:seed_fu RAILS_ENV=production

Install with Passenger + Apache

(todo)

Install with Thin + Nginx